A new design method for industrial portal frames in fire

For single-storey steel portal frames in fire, especially when they are situated close to a site perimeter, it is imperative that the boundary walls stay close to vertical, so that fires which occur are not allowed to spread to adjacent properties. A current UK fire design guide requires either that the whole frame be protected as a single element, or that the rafter may be left unprotected if column bases and foundations are designed to resist the forces and moments generated by rafter collapse, in order to ensure the lateral stability of the boundary walls. This can lead to very uneconomical foundation design and base-plate detailing. In previous studies carried out at the University of Sheffield it was found that a fundamental aspect of the collapse of a portal frame rafter is that it usually loses stability in a “snap-through” mechanism, but is capable of re-stabilising at high deflections, when the roof has inverted but the columns remain close to vertical. Numerical tests performed using the new model show that the strong base connections recommended by the current design method do not always lead to a conservative design. It is also found that initial collapse of the rafter is always caused by a plastic hinge mechanism based on the frame’s initial configuration. If the frame can then re-stabilize when the roof is substantially inverted, a second mechanism relying on the re-stabilized configuration can lead to failure of the whole frame. In this paper, a portal frame with different bases is simulated numerically using Vulcan, investigating the effect of different base strength on the collapse behaviour. The test results are compared with the failure mode assumed by the current design method. A new method for the estimation of re-stabilized positions of single-span frames in fire, using the second failure mechanism, is discussed and calibrated against the numerical test results

Stability of stainless-steel nanoparticle and water mixtures

Fluids containing particles that are small enough to remain in suspension over prolonged periods of time sometimes exhibit exceptional thermal properties. While considerable work has been reported on such mixtures based on oxides, inert powders and non-corrosive fluids, the present work explores the stability and thermal conductivity of mixtures of fine particles of stainless steel and pure water. In particular, aspects of sedimentation and the ability to obtain dispersals of particles with the fluid and avoid agglomeration were studied. Amongst the parameters studied, it is found that controlling the hydrogen ion concentration helps to stabilise the mixtures more than the addition of surfactants in case of 0.017 wt% stainless steel-water fluids. This is important in obtaining ζ-potentials that are large enough to sustain a significant repulsion between like particles in the fluid. The work forms the foundation of future studies on the properties of such mixtures, especially for heavy metallic particles. For 0.017wt% stainless steel-distilled water nanoparticle-fluid, the thermal conductivity increases by 8.3% at the optimal stability condition of pH 11.This is the accepted manuscript. The final version is available at http://www.sciencedirect.com/science/article/pii/S003259101400936X

Evidence for non-self-similarity of microearthquakes recorded at a Taiwan borehole seismometer array

We investigate the relationship between seismic moment M0 and source duration tw of microearthquakes by using high-quality seismic data recorded with a vertical borehole array installed in central Taiwan. We apply a waveform cross-correlation method to the three-component records and identify several event clusters with high waveform similarity, with event magnitudes ranging from 0.3 to 2.0. Three clusters—Clusters A, B and C—contain 11, 8 and 6 events with similar waveforms, respectively. To determine how M0 scales with tw, we remove path effects by using a path-averaged Q. The results indicate a nearly constant tw for events within each cluster, regardless of M0, with mean values of tw being 0.058, 0.056 and 0.034 s for Clusters A, B and C, respectively. Constant tw, independent of M0, violates the commonly used scaling relation tw∝M1/30tw∝M01/3. This constant duration may arise either because all events in a cluster are hosted on the same isolated seismogenic patch, or because the events are driven by external factors of constant duration, such as fluid injections into the fault zone. It may also be related to the earthquake nucleation size

Phosphorus fractions and alkaline phosphatase activity in sediments of a large eutrophic Chinese lake (Lake Taihu)

Spatial, vertical, and seasonal variations in phosphorus fractions and in alkaline phosphatase activity (APA) were investigated in sediments in a large-shallow eutrophic Chinese lake (Lake Taihu) in 2003-2004. The phosphorus content was highest in the most seriously polluted lake area. Iron-bound phosphorus (Fe(OOH)-P) dominated (47% on average) among the phosphorus fractions determined according to Golterman (Hydrobiologia 335:87-95, 1996). Notably, organically-bound P comprised a further significant additional portion (acid-soluble + hot NaOH-extractable organic P = 25%), which was highest at the most polluted sites. The Fe(OOH)-P content was the lowest in spring (April, 2004), suggesting that degradation of organic matter led to the release of iron-bound phosphates. Sediment APA showed a significant positive relationship with both organically-bound P and Fe(OOH)-P. Consequently, organically-bound P is an important portion of the sediment phosphorus in Lake Taihu. It is mainly derived from freshly-settled autochthonous particles and from external discharges. Organically-bound P induces APA and may lead to the release of bioavailable phosphates from the organic sediments, thereby accelerating lake eutrophication.Spatial, vertical, and seasonal variations in phosphorus fractions and in alkaline phosphatase activity (APA) were investigated in sediments in a large-shallow eutrophic Chinese lake (Lake Taihu) in 2003-2004. The phosphorus content was highest in the most seriously polluted lake area. Iron-bound phosphorus (Fe(OOH)-P) dominated (47% on average) among the phosphorus fractions determined according to Golterman (Hydrobiologia 335:87-95, 1996). Notably, organically-bound P comprised a further significant additional portion (acid-soluble + hot NaOH-extractable organic P = 25%), which was highest at the most polluted sites. The Fe(OOH)-P content was the lowest in spring (April, 2004), suggesting that degradation of organic matter led to the release of iron-bound phosphates. Sediment APA showed a significant positive relationship with both organically-bound P and Fe(OOH)-P. Consequently, organically-bound P is an important portion of the sediment phosphorus in Lake Taihu. It is mainly derived from freshly-settled autochthonous particles and from external discharges. Organically-bound P induces APA and may lead to the release of bioavailable phosphates from the organic sediments, thereby accelerating lake eutrophication

Mixed integer programming in production planning with backlogging and setup carryover : modeling and algorithms

This paper proposes a mixed integer programming formulation for modeling the capacitated multi-level lot sizing problem with both backlogging and setup carryover. Based on the model formulation, a progressive time-oriented decomposition heuristic framework is then proposed, where improvement and construction heuristics are effectively combined, therefore efficiently avoiding the weaknesses associated with the one-time decisions made by other classical time-oriented decomposition algorithms. Computational results show that the proposed optimization framework provides competitive solutions within a reasonable time

Source Characteristics of the 2016 Meinong (ML 6.6) Taiwan Earthquake Revealed from Dense Seismic Arrays: Double Sources and Pulse-like Velocity Ground Motion

The 5 February 2016, Meinong, Taiwan, earthquake brought extensive damage to nearby cities with significant pulse‐like velocity ground motions. In addition to the spatial slip distribution determination using filtered strong‐motion data, we show that, with the advantage of the densely distributed seismic network as a seismic array, we can project the earthquake sources (asperities) directly using nearly unfiltered data, which is crucial to the understanding of the generation of the pulse‐like velocity ground motions. We recognize that the moderate but damaging ML 6.6 Meinong earthquake was a composite of an Mw 5.5 foreshock and an Mw 6.18 mainshock with a 1.8–5.0 s time delay. The foreshock occurred at the hypocenter reported by the official agency, followed by the mainshock with a centroid located at 12.3 km to the north‐northwest of the hypocenter and at a depth of 15 km. This foreshock–mainshock composition is not distinguishable in the finite‐fault inversion because it filtered the seismic data to low frequencies. Our results show that the pulse‐like velocity ground motions are mainly attributed to the source of mainshock with its directivity and site effects, resulting in the disastrous damages in the city of Tainan. Although finite‐fault inversion using filtered seismic data for spatial slip distribution on the fault has been a classic procedure in understanding earthquake rupture processes, using a dense seismic network as a seismic array for unfiltered records helps us delineate the earthquake sources directly and provide more delicate information for future understanding of earthquake source complexity

Structural Characterization of Mesoporous Silica Nanofibers Synthesized Within Porous Alumina Membranes

Mesoporous silica nanofibers were synthesized within the pores of the anodic aluminum oxide template using a simple sol–gel method. Transmission electron microscopy investigation indicated that the concentration of the structure-directing agent (EO20PO70EO20) had a significant impact on the mesostructure of mesoporous silica nanofibers. Samples with alignment of nanochannels along the axis of mesoporous silica nanofibers could be formed under the P123 concentration of 0.15 mg/mL. When the P123 concentration increased to 0.3 mg/mL, samples with a circular lamellar mesostructure could be obtained. The mechanism for the effect of the P123 concentration on the mesostructure of mesoporous silica nanofibres was proposed and discussed

Identification, Characterization, and Expression of a Novel P450 Gene Encoding CYP6AE25 from the Asian Corn Borer, Ostrinia furnacalis

An allele of the cytochrome P450 gene, CYP6AE14, named CYP6AE25 (GenBank accession no. EU807990) was isolated from the Asian com borer, Ostrinia fumacalis (Guenée) (Lepidoptera: Pyralidae) by RT-PCR. The cDNA sequence of CYP6AE25 is 2315 bp in length and contains a 1569 nucleotides open reading frame encoding a putative protein with 523 amino acid residues and a predicted molecular weight of 59.95 kDa and a theoretical pI of 8.31. The putative protein contains the classic heme-binding sequence motif F××G×××C×G (residues 451–460) conserved among all P450 enzymes as well as other characteristic motifs of all cytochrome P450s. It shares 52% identity with the previously published sequence of CYP6AE14 (GenBank accession no. DQ986461) from Helicoverpa armigera. Phylogenetic analysis of amino acid sequences from members of various P450 families indicated that CYP6AE25 has a closer phylogenetic relationship with CYP6AE14 and CYP6B1 that are related to metabolism of plant allelochemicals, CYP6D1 which is related to pyrethroid resistance and has a more distant relationship to CYP302A1 and CYP307A1 which are related to synthesis of the insect molting hormones. The expression level of the gene in the adults and immature stages of O. furnacalis by quantitative real-time PCR revealed that CYP6AE25 was expressed in all life stages investigated. The mRNA expression level in 3rd instar larvae was 12.8- and 2.97-fold higher than those in pupae and adults, respectively. The tissue specific expression level of CYP6AE25 was in the order of midgut, malpighian tube and fatty body from high to low but was absent in ovary and brain. The analysis of the CYP6AB25 gene using bioinformatic software is discussed

Hierarchy measure for complex networks

Nature, technology and society are full of complexity arising from the intricate web of the interactions among the units of the related systems (e.g., proteins, computers, people). Consequently, one of the most successful recent approaches to capturing the fundamental features of the structure and dynamics of complex systems has been the investigation of the networks associated with the above units (nodes) together with their relations (edges). Most complex systems have an inherently hierarchical organization and, correspondingly, the networks behind them also exhibit hierarchical features. Indeed, several papers have been devoted to describing this essential aspect of networks, however, without resulting in a widely accepted, converging concept concerning the quantitative characterization of the level of their hierarchy. Here we develop an approach and propose a quantity (measure) which is simple enough to be widely applicable, reveals a number of universal features of the organization of real-world networks and, as we demonstrate, is capable of capturing the essential features of the structure and the degree of hierarchy in a complex network. The measure we introduce is based on a generalization of the m-reach centrality, which we first extend to directed/partially directed graphs. Then, we define the global reaching centrality (GRC), which is the difference between the maximum and the average value of the generalized reach centralities over the network. We investigate the behavior of the GRC considering both a synthetic model with an adjustable level of hierarchy and real networks. Results for real networks show that our hierarchy measure is related to the controllability of the given system. We also propose a visualization procedure for large complex networks that can be used to obtain an overall qualitative picture about the nature of their hierarchical structure.Comment: 29 pages, 9 figures, 4 table